Orthopaedic

Tibia with proximal varus defect of 30 degrees. Includes cancellous inner material. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and drill easier than the plastic cortical shell models. Over...

Femur includes cancellous inner material, a canal diameter and greater trochanteric entry site of 14 mm, and an overall length of 42 cm. Used for intramedullary nailing applications. Foam cortical shell models are made of a rigid foam shell with inner...

Foot with assembled talus, calcaneus, and forefoot with common flatfoot condition. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Hand and wrist with ulna, radius, and hand bones articulated with latex bands. Scaphoid, lunate, triquetral, and pisiform section articulated separately. Solid foam models are made of rigid foam throughout. This is an economical material for general...

Ulna, radius, and hand articulated with latex bands. Includes a distal three-part intra-articular radial fracture reattached with latex bands. Ulna made of solid foam with a canal diameter of 5mm and an overall length of 27.5 cm. Radius with cancellous...

Distal femur and Tibia with four stretch cord ligaments; LCL, MCL, ACL, and PCL. Femur with cancellous inner material, a canal diameter of 16 mm, and an overall length of 47 cm. Tibia with cancellous inner material, a canal diameter of 12 mm, and an...

Femur and tibia with cancellous inner material and solid foam fibula, talus, calcaneus, and forefoot. Knee articulated with three stretch cord ligaments; LCL, MCL, and PCL. Ankle articulated with latex bands. Includes looped proximal femur cord for...

Full femur to foot with replaceable articulated knee bones. The femoral head is exposed from the soft tissue skin above the lesser Trochanter. Leg is bendable from 0 to 120 degrees. Bones are removable from posterior access cut.

Radius includes a short oblique mid-shaft fracture reattached with latex bands. With a canal diameter of 6.4 mm and an overall length of 25 cm. AO Fracture Classification: 2R2A2 Solid foam models are made of rigid foam throughout. This is an economical...

Tibia with mid-shaft malunion and a 20 degree oblique plane defect. No canal. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

For use with external alignment clamps for total knee implants. Accessory for most knee holders and knees.

Elbow with humerus, ulna, and radius with four-part fracture of the humeral head. Articulation and fracture reattachment achieved with latex bands. Humerus with cancellous inner material, a canal diameter of 9.5 mm, and an overall length of 36 cm. Ulna...

Elbow with humerus, radius, and ulna articulated with latex bands. Includes lateral fracture of the humeral condyle. Fracture reattached with latex bands. All bones include cancellous inner material. Humerus with a 9.5 mm canal, ulna and radius with 5 mm...

Femur includes cancellous inner material and 15.5 mm diameter canal. Overall length of 47 cm. Plastic cortical shell models are made of a rigid plastic shell with inner cancellous material. Plastic cortical shell models are very durable.

Femur includes a 25 degree distal valgus deformity. With no canal and an overall length of 42 cm. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Femur includes cancellous inner material, a canal diameter of 12.7 mm, and an overall length of 42 cm. No distal plug. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and drill easier than the...