Orthopaedic

Solid fibula without canal. Overall length is 38 cm. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Foot and ankle with distal tibia and fibula articulated with latex bands to fused foot bones. Made of solid foam and includes radiopaque properties. models are designed for medical imaging. Solid foam models include enhanced visualization properties on...

Ulna, radius, and hand articulated with latex bands. Includes distal radial Colles' fracture reattached with latex bands. Ulna with a canal diameter of 5mm and an overall length of 27.5 cm. Radius with a canal diameter of 5.5 mm and an overall length of...

Hand includes index finger with spiral fracture of the proximal phalanx and transverse fractures of the first, fourth, and fifth metacarpals. Fractures reattached with latex bands. AO FX Classification: 25B2.1, 25B2.2 Solid foam models are made of rigid...

Proximal humerus includes cancellous inner material. Higher than standard density cortex. Used with the Intraosseous Access System #1051-16-1. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and...

Knee articulated with three stretch chord ligaments; LCL, MCL, and PCL. Includes cancellous inner material. Femur with a canal diameter of 9.5 mm and an overall length of 35 cm. Tibia with a canal diameter of 8 mm and an overall length of 30 cm. Foam...

Femur and tibia articulated with three stretch tube ligaments; LCL, MCL, and PCL. Includes cancellous inner material. Femur with a canal diameter of 12 mm and an overall length of 47 cm. Tibia with a canal diameter of 12.5 mm and an overall length of 42...

Tibia includes a bicondylar "Y" fracture reattached with latex bands. Fibula made of solid foam. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and drill easier than the plastic cortical shell...

Tibia and fibula include mid-shaft malunion of both bones and a 10 degree distal varus defect. Tibia with cancellous inner material, a canal diameter of 12 mm, and an overall length of 38 cm. Solid foam fibula. Foam cortical shell models are made of a...

Full length tibia and fibula with distal oblique fibular fracture reattached with latex bands. (Weber Type B1) Tibia includes cancellous inner material. Fibula is made of solid foam. Foam cortical shell models are made of a rigid foam shell with inner...

Tibia with cancellous inner material, 12.5 mm canal diameter and an overall length of 42 cm. Solid fibula without a canal. Plastic cortical shell models are made of a rigid plastic shell with inner cancellous material. Plastic cortical shell models are...

Tibia includes fracture of the medial condyle and long oblique fracture of the proximal third. Fractures reattached with latex bands. With cancellous inner material, a 12.5 mm canal diameter, and an overall length of 42 cm. AO Classification: 41B1.2 ...

Ulna with a canal diameter of 5 mm and an overall length of 27.5 cm. Radius with a canal diameter of 5.5 mm and an overall length of 25 cm. Articulated with latex bands. Solid foam models are made of rigid foam throughout. This is an economical material...

Designed as a permanent holder for full-length left medium or large knee models. Can be adjusted to full extension and also 90, 100, 110, and 120 degrees flexion. Includes lower leg knee holder #1506-4, upper leg knee holder #1506-5, knee stand #100101,...

Acetabulum only, with labrum and vise attachment. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Ankle includes distal tibia and fibula articulated with talus and calcaneus. Includes supination-adduction Type A fracture. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.