Shop by Specialty

Knee articulated with three latex tube ligaments. Includes the collateral ligaments and posterior cruciate with cancellous inner material. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and...

Femur and tibia articulated with three stretch cord ligaments; LCL, MCL, and PCL. Includes cancellous inner material. Femur with a narrower and deeper than usual intercondylar notch, a canal diameter of 15 mm, and an overall length of 42 cm. Tibia with a...

2 cm bone blocks of 20 PCF foam on each end of 40 mm Naugahyde ligament. Bone blocks include 3 mm holes.

Hemi pelvis, includes superior and posterior segmental defects. With vise attachment and an acetabulum of approximately 60 mm. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Humerus includes four-part fracture of the humeral head reattached with latex bands. With cancellous inner material, a canal diameter of 9.5mm, and an overall length of 36 cm. AO Classification: C2.2 Foam cortical shell models are made of a rigid foam...

Knee with cancellous inner material, and solid foam patella. Articulated with three stretch tube ligaments; LCL, MCL, and PCL. Femur with a canal diameter of 15 mm and an overall length of 42 cm. Tibia with a canal diameter of 12 mm and an overall length...

Includes midshaft short oblique fracture reattached with latex bands. With cancellous inner material and a 12 mm diameter canal. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and drill easier...

Femur, tibia, and fibula articulated with four non-stretch ligaments; LCL, MCL, ACL, and PCL. Femur and tibia include cancellous inner material. Femur with a canal diameter of 16 mm and an overall length of 47 cm. Tibia with a canal diameter of 12.5 mm...

Partial solid foam skull with vise attachment and flexible foam brain for craniotomy. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Rectangular block of 10 PCF foam with 2 mm of 40 PCF laminate. Includes red neoprene simulated cuff. 83 mm x 58 mm x 42 mm overall dimensions.Solid rigid polyurethane foam is used as an alternative test medium for human cancellous bone. It does not...

Cylinder, 25 mm X 400 mm with a 9 mm canal. Simulate mid-diaphyseal bone for fracture fixation testing with our hollow or foam filled solid foam cylinders. Rigid foam products are an alternative material to human cadaver bone for testing and...

Femur and tibia articulated with stretch cord LCL and MCL. With revision cuts of the total knee and a 17mm gap between cut surfaces. Includes cancellous inner material. Femur with a canal diameter of 15 mm and an original overall length of 47 cm. Tibia...

Reusable holder with a posterior approach. May be used with, or without 1528-9 Occipital component. Occipital attachment and spine model sold separately.

Cervical spine, C1 to C7, includes blue nerve roots and cancellous inner material. Articulated with tan flexible discs. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and drill easier than the...

Lumbar, L3 to sacrum, articulated with posterior Naugahyde ligament and tan flexible discs. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Distal femur and proximal tibia with cancellous inner material, and solid foam patella. Articulated with four stretch tube ligaments; LCL, MCL, ACL, and PCL. Femur with a narrower and deeper intercondylar notch and a canal diameter of 15 mm. Tibia with a...