Orthopaedic

Full spine, C1 to sacrum, articulated with anterior and posterior ligaments and tan flexible discs. Includes malleable rod for limited manipulation and fixation. Solid foam models are made of rigid foam throughout. This is an economical material for...

Tibia includes bicondylar fracture of the tibial plateau with fragment on medial side, and long oblique fracture at the tibial tuberosity. Fractures reattached with latex bands. Includes cancellous inner material. AO Classification: 41C1 Foam cortical...

Ulna with a canal diameter of 5 mm and an overall length of 27.5 cm. Radius with a canal diameter of 5.5 mm and an overall length of 25 cm. Articulated with latex bands. Solid foam models are made of rigid foam throughout. This is an economical material...

Ulna includes a canal diameter of 5 mm and an overall length of 27.5 cm. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Includes midshaft transverse fracture reattached with latex bands. With cancellous inner material, a canal diameter of 9.5 mm, and an overall length of 35 cm. Foam cortical shell models are made of a rigid foam shell with inner cancellous material...

Foot and ankle with distal tibia and fibula articulated with talus, calcaneus, and fused forefoot. Includes pilon and lateral malleolus fractures, reattached with latex bands. AO Classification: 43C1.3 Foam cortical shell models are made of a rigid foam...

Solid hand bones include scaphoid articulated with partial ligament. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Left hemi pelvis with a 54 mm acetabulum and density of 15 PCF. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.

Humerus includes four-part "Y" fracture through the trochlea and capitulum grooves. With cancellous inner material, a canal diameter of 9.5mm, and an overall length of 36cm. Fracture reattached with latex bands. AO Classification: 13C1 Foam cortical...

Distal femur and proximal tibia articulated with four stretch tube ligaments; LCL, MCL, ACL, and PCL. Includes cancellous inner material and a narrower and deeper than usual intercondylar notch. Femur with a 15 mm canal diameter, and tibia with a 12 mm...

Knee Model can be used for ACL reconstruction either arthroscopically or open. Includes permanent soft tissue sleeve, replaceable ACL knee joint insert #1414-5, and all appropriate clamps.

Femur, tibia, fibula, and foot bones. Femur and tibia include cancellous inner material, fibula and foot bones made of solid foam. Includes bicondylar fracture of the tibial plateau. Fracture reattachment and joint articulations achieved with latex bands...

L1 to sacrum articulated with anterior and posterior ligaments and tan flexible discs. Includes radiopaque properties and non-removeable holder made of soft tissue with skin. Radiopaque models are designed for medical imaging. Solid foam models include...

Full Male Pelvis includes posterior wall fractures of each acetabulum, and pubis disruption. Fractures reattached and disruption achieved with latex bands. With 57 mm acetabulum. Solid foam models are made of rigid foam throughout. This is an economical...

Tibia with proximal varus defect of 30 degrees. Includes cancellous inner material. Foam cortical shell models are made of a rigid foam shell with inner cancellous material. These models cut and drill easier than the plastic cortical shell models. Over...

Distal tibia with a 12 mm canal diameter. Solid foam models are made of rigid foam throughout. This is an economical material for general anatomy.